Salam…saya ada sebuah fiber 12ft utk kegunaan memancing..masalahnya baru2ini saya telah dapat mengesan satu lubang kecil padanya jadi persoalannya bagaimana dn apakah bahan yg perlu saya gunakan utk menutupi lubang tersebut dan di manakah boleh sya cari bahan tersebut…sekian terima kasih.
Salam, kalau bot fiber, gunalah fiber untuk tampal.
Kalau lubang tu kecil je lagi senang nak ditampal. Mula2 pegi kekedai hardware dan beli epoxy glue dan ketas pasir wet/dry grade 200. Bila kedua2 bahan tu dah ada, bersihkan permukaan yan bocor tu kemudian tenyeh dengan ketas pasir. Agak2 dah betul2 bersih dan betul2 kering, bancuhkan gam epoxy tadi (biasanya nisbah bancuhan 50/50 atau ikut arahan pada bungkusan) dan tampalkan pada tempat yang bocor tadi. Biarkan kering sehingga 24 jam. Selesai. Kos keseluruhan less dan RM20 + peluh. hehe…
Mekasih pak lang akn sy cuba nnti…dpt gak satu ilmu berguna…[:D]
U boleh beli Kossan Filler, this is very good, tapi u kena check lubang tu kat mana bec u need to cut and fill the hole depending on where and also size of hole… also u kena check is the hole dah sampai kayu kalau dah sampai u kena cermat sikit, make sure u remove old fibre and glue around the hole… lepas tu fill this hole up with filler and then use sand paper and sand it down, if the hole not big u can now apply epoxy and then resand it, get some paint on it and no one will be able to tell where is the hole.
If the crack is long and big u need a bit more work bec after u use the Kossan filler u would need to get some kain fibre glass and also some epoxy and u are ready for stage 2, apply the epoxy on the fibreglass sheet and then apply, make sure u remove all the bubbles with a roller and then wait. if not a big job 1 layer dah cukup, lepas tu get sand paper and sand it down to level, lepas tu cat and u have a much stronger hull… good luck
No pain no gain, dont try dont know… muahahahahaha