Hello uncle,
Do u know where I can get Carbontex drag washer for Daiwa 153HSTA, will be very happy if you have in stock.[:)]
Hello Miaw,
Perhaps you can provide the dimension for the drag that you have now. Example: outer diameter and inner diameter
It will make Unker to cater for you easier
Some of my works:-
http://www.oceanfishingtackle.com
http://www.freshliveseafood.com
http://www.professional-landscaper.com
http://www.online-landscaper-store.com
http://www.labourasia.com
quote:
Originally posted by rorytate
Hello Miaw, Perhaps you can provide the dimension for the drag that you have now. Example: outer diameter and inner diameterIt will make Unker to cater for you easier
Some of my works:-
http://www.oceanfishingtackle.com
http://www.freshliveseafood.com
http://www.professional-landscaper.com
http://www.online-landscaper-store.com
http://www.labourasia.com
Hello Miaw, RT is correct, let me have the inner& outer diameter.
why not use the carbon matrix drag which I have in stock. Carbon matrix drag used in small ABU REVO STX can attain more than 10kg drag.
hi uncle… well come back… am sure u had a good time… hopefully the package delivered to u already… did try to open it up but dunno how to fix the problem… am sure it is in good hands…
thanks…
quote:
Originally posted by ishaharin
hi uncle... well come back... am sure u had a good time... hopefully the package delivered to u already... did try to open it up but dunno how to fix the problem... am sure it is in good hands...thanks…
Worry not my friend, I got the parcel, lucky is not a time bomb.
Did you open the reel yourself ? or serviced by any one else?
i did it myself… trying to check the washer and lube\greese the reel but cannot fix the release knob' properly... I'v actually did more damage to the reel... so smart’ eh… mau trial n error… jadi semua error… ini memang kes “tikus adjust labu”… a friend help to fix the ‘spool realese knob’ but it just doesn work properly, well a lil better actually
…
but its my fav reel… wont exchage it for anything else… still gotto fix it at any cost… but if need to break the bank, I keep it as a “showcase”…
quote:
Originally posted by ishaharin
i did it myself... trying to check the washer and lube\greese the reel but cannot fix the release `knob' properly... I'v actually did more damage to the reel... so `smart' eh... mau trial n error... jadi semua error.... ini memang kes "tikus adjust labu"... a friend help to fix the 'spool realese knob' but it just doesn work properly, well a lil better actually ...but its my fav reel… wont exchage it for anything else… still gotto fix it at any cost… but if need to break the bank, I keep it as a “showcase”…
Ya lah macam maikonic boleh buka engine, tapi tak boleh pasang balik, heheheh. Don’t worry, I will give it a good service and have new carbon matrix drag installed, it will be as good as new with better drag performance.
You are right… Malaysia boleh! and I tot I also Boleh…
Anyway, Thank you Uncle Thomas… you’re the man…!!!
quote:
Originally posted by ishaharin
You are right... Malaysia boleh! and I tot I also Boleh.....Anyway, Thank you Uncle Thomas… you’re the man…!!!
OK , I’ll send it back to you next week.
Thanks uncle for putting effort to reply. In this case i need to open my reel and check the measurement.
BTW my Daiwa bc have 3 drag washers (exclude the metal washers) most outer one same with abu (first black washer from the right)as I am now using abu carbon matrix to replace that but the other 2 very different with bigger inner & outer diameter to fit the slightly bigger main gear. I hope I correctly link these image of daiwa drag set.
This next link should show the revo drag which have all same size.
Will this abu drag fit the record RCN50/5600 series? If they do please quote me your best price for 1 set of the abu drag as my abu is now missing 1 pc of the drag.(now in the daiwa)
Regards
Hello M2x,
Since the outer diameter of the Revo drag washer is about the same as the Daiwa’s, you will have to increase the inner diameter by cutting with a very sharp cutter to accommodate the Daiwa. Surprisingly the Revo drag washer is bigger than the RCN50/5600, that’s why the REVO drag is stronger than the 5600/6500 series. Anyway there are original size of carbon matrix for the 5600 series. Let me know how many pieces of Revo’s and 5600’s drag washer you need. The drag washers are cheap..RM4.00 PER PC, then add RM8.00 FOR COURIER SERVICE.
Very fast reply, thanks.
In this case no need measure lah, I would like to order as follows;
1 set @ 3 pcs of revo carbon matrix drag
1 set @ 3 pc of RCN50/5600 carbon matrix drag
Pls sms me at 012 8809881 the total charges including courier to Sibu, Sarawak + which acc no to sent $$. Also some ‘discount’ if any ehemm ehemmm.[:D][:D]
quote:
Originally posted by miaw2x
Very fast reply, thanks.In this case no need measure lah, I would like to order as follows;
1 set @ 3 pcs of revo carbon matrix drag
1 set @ 3 pc of RCN50/5600 carbon matrix dragPls sms me at 012 8809881 the total charges including courier to Sibu, Sarawak + which acc no to sent $$. Also some ‘discount’ if any ehemm ehemmm.[:D][:D]
OH OH, I do not know you are in Sibu… The courier cost will not be RM8.00, it will be RM15.00 PLUS RM24.00 FOR THE DRAG WASHERS.
Total RM39.00…I will sms to you my account particulars. Don’t forget to give me your address.
Done.
Now looking for drag grease, u have any of those shimano, daiwa or cal drag grease?
quote:
Originally posted by miaw2x
Done.Now looking for drag grease, u have any of those shimano, daiwa or cal drag grease?
Thanks for the payment, you are a good paymaster indeed.
FYI, the carbon matrix drag, do not require grease at all, it should be kept as clean as possible and not contaminated with grease. For other type of drags if it is specified to use grease, then you may do so, teflon drag is ok with grease, but I still prefer to keep them free from any lube.
Rcvd the carbontex drag washer with your brochure, tide chart and mini calender thanks…all with your handsome photos. You should have ‘autograph’ your photos b4 sending over. Will try the washer on the daiwa and post the result soonest.
quote:
Originally posted by miaw2x
Rcvd the carbontex drag washer with your brochure, tide chart and mini calender thanks.....all with your handsome photos. You should have 'autograph' your photos b4 sending over. Will try the washer on the daiwa and post the result soonest.
You are most welcome, hope you have fun doing up your reel, cheers!!
quote:[/quote]
Originally posted by adam_5967
Hi Unc Thomas,pardon my ignorance but could you please let me know the difference between the Abu Revo and Abu Revo STX ? Thanks.
Hello Miaw, RT is correct, let me have the inner& outer diameter.
why not use the carbon matrix drag which I have in stock. Carbon matrix drag used in small ABU REVO STX can attain more than 10kg drag.
Hello Adam,
The ABU REVO is the series which consist of the following models:
ABU REVO STX
ABU REVO SX
ABU REVO S
ABU REVO INSHORE
ABU REVO PREMIER
dear uncle.can please give me info regarding carbontex drag for abu garcia c3 6500 and shimano curado(101b)for baitcaster and ryobi zauber model 2000 and daiwa exceler 3000 for spinning.
quote:
Originally posted by abuyon9853
dear uncle.can please give me info regarding carbontex drag for abu garcia c3 6500 and shimano curado(101b)for baitcaster and ryobi zauber model 2000 and daiwa exceler 3000 for spinning.
Carbontex drag washers are from SMOOTH DRAG. It is the new generation of carbon fibre drag washers commonly used in most high performance reels.